NO MICROPHONE AUDIO IN MS EDGE MS Edge maintains its own default microphone selection that is completely separate from Chrome. Edge may have currently bound a website to an inactive hardware input (such as a Virtual Audio Cable, Stereo Mix, or a webcam with the gain turned down), whereas Chrome often correctly guesses the good headset and microphone. 1. Open a new tab in Microsoft Edge, paste edge://settings/content/microphone into the address bar, and press Enter. 2. Click the drop-down menu at the very top of the settings page. Change the selection from the current device to the specific physical headset or desktop microphone you are speaking into. 3. Look under the "Allow" list further down that same settings page. Ensure the domain you are using to connect to (e.g. canadanetserver.homeip.net) is listed. If it is accidentally listed under the "Block" section, click the trash can icon next to it so the site can request permission again. SOUND GOING TO PC SPEAKERS INSTEAD OF HEADSET 1. Opent the Sound Control Panel: Press Win + R, type mmsys.cpl [enter] 2. Ensure the headset is set as both the "Default Device" AND the "Default Communications Device" in the classic Windows Sound Control Panel. Chrome often gets permanently stuck to an old output device if you ever plugged/unplugged a USB device while the browser was open. 1. Right-click the Speaker icon in your Windows taskbar (bottom right) and select Open Sound settings. 2. Scroll down to the bottom and click App volume and device preferences. 3. Look for Google Chrome in the list of open apps. 4. Change its specific Output dropdown from "Default" to explicitly select the headset (e.g., Speakers (2- USB Audio Device)). Note: Chrome must be actively playing a sound to appear in this list, so turn the radio on via the web interface first. ALLOW UNSOLICITED INBOUND UDP IN WINDOWS DEFENDER FIREWALL Get iOS cellular audio and UI sync working by allowing unsolicited Inbound UDP in Windows Defender Firewall on 10.10.10.80 (the computer running the ft991a.exe console program). Because packets arriving from your iPhone through the ER707-M2 router have an external cellular public IP as their source address, Windows Firewall will drop them unless explicitly permitted across all network profiles. 1. Press Win + R, type wf.msc, and press Enter to open Windows Defender Firewall with Advanced Security. 2. Click Inbound Rules in the left pane. 3. Click New Rule... in the right pane. 4. Select Port -> Next -> Select UDP and type 50000-50010 in "Specific local ports" -> Next. 5. Select "Allow the connection" -> Next. 6. Keep all three boxes checked (Domain, Private, and Public). 7. Name the rule "FT991A WebRTC UDP", and click Finish. 8. Verification: Confirm "FT991A WebRTC UDP" appears at the top of the Inbound Rules list with a green checkmark, Protocol set to UDP, and Local Port set to 50000-50010.